Tyre Sidewall

Deducing your Tyre Sidewall Codes and how to read them?

Spread the love

Tyres are the most crucial part of a car, it makes it more important to be in harmony with the vehicle. A proper sized tyre for your vehicle will give you quality performance. It will keep your car safe and offers you stability while steering or cornering. The tyre needs to be compatible with the vehicle. To make sure you do not get a misfit for your car, the manufacturers mention the size of the tyre on its sidewalls. The car manual will help you know better what your tyres near me requires.

How to read Car tyre?

It is suggested to buy a tyre according to the size referred by the manufactures. It is given in the manual of your car. Sure larger tyre gives robust look to a car. They also improve the performance of the ride. Tampering with the size of tyres can put a negative impact on your tyre in long run.

You need to look for the codes mentioned on the sidewall of the tyre to know the size of a tyre. Reading a tyre can be confusing. Tyres have marking which will tell you the height of the sidewall, diameter of the rim, speed rating offered by the tyre, width of the tyre, the capacity of the load carried by a tyre and other specifications. Even after knowing what every marking means, it is difficult to crack it at one go. There are different markings for each specification. For example:

Application 

Application of the car tyres means for which usage it is most suitable. For instance, P stands for passenger tyres.

Load index

The tyres are the only part of a car in contact with the surface. Tyres are responsible for carrying the entire load of the vehicle and the passengers sitting in it. Different tyres can carry a different amount of weight. It is usually mentioned on the sidewalls of the tyres. The load index is the maximum capacity of load a tyre can bear. Passenger tyres have a load index that ranges from 75 to 105.

Speed reading

The speed rating is last in the sequence mentioned on the sidewall of the tyre. Every tyre has a maximum speed up to which it can run. It is denoted by a letter symbol that varies from A to Z. Under the recommended load index the tyre can survive at the mentioned speed rating. Although a tyre can achieve high speed, we do not encourage driving above the limit illegally. Different letters mean different speed ratings. For example speed rating of H mean 209kph or 130mph.

To be more specific let us decipher the marking of Cheap Tyres Bath.

225: Tyre width

The width of the tyre decides the performance of the tyres. It is measured as the maximum measurement from the sidewall to the sidewall. Wide width tyres are suitable for hilly roads and off-roading. But you should stay clear of a wide width tyre if you usually drive around the town. We can help you choose the width of the tyre according to your requirements. Here the tyre has a 225mm width tyre.

50: Aspect ratio

The aspect ratio represents the height of the sidewall concerning the width of the tyre. The aspect ratio is the height of the tyre divided by the width of the tyre. Here, a 50 aspect ratio means the height of the tyre is 50% of the width of the tyre.

R- Construction

The casing of the tyre has a different construction. R means the casing of the tyre has radial construction. B or D construction means the tyre casing has bias-ply construction or diagonal construction respectively.

17- Diameter of rim

The diameter of the rim is one of the crucial ways to judge the size of the tyre. It is measured in inches. The tyres we are talking about here has a rim diameter of 17inches.

Additional reading

Apart from the size of the tyre. Your tyre’s sidewall also contains a few extra details you should know about your tyres.

SSR stands for self-supporting run-flat tyres. Tyres that come with this marking have reinforced walls. In an unfortunate case of tyre puncture, run-flat tyres can still be used and get you to a safe place.

M+S means mud and snow. Winter tyres usually come with the M+S symbol. Tyres with this symbol will work efficiently in muddy and snowy conditions.

DOT proves that the tyre is complaint with the department of transportation, ie., DOT, motor vehicle safety standards.

The year and week of production must be checked before you purchase a new tyre. For instance, the tyres say 36/16, this means it was manufactured in the 36th week of 2016. You should never buy a tyre older than 3 months.

Directional arrow makes your work easy for the mechanic while fitting a tyre. It tells the direction in which the tyre should be fitted.

Approval signature is to make sure that your tyre is compliant with the regulation and approved by the authority.

If you are looking to buy a tyre simple tyres near me will take you to us directly. We aim to offer you with tyre accustomed to your needs. We offer other services as well. With a wide range of tyres, you can choose a comfortable tyre that will provide you with performance and safety.

Read More:-DEFECTIVE TYRES

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *