Is your TP Link WiFi extender on but still you are getting no internet? No worries! You have landed on the right post. Here, we are going to provide you some of the best hacks that will help you fix “TP Link extender on but no internet” issue in a jiffy. Let’s start over!
Fixed: TP Link Extender On But No Internet
There could be a number of reasons behind getting “TP Link extender on but no internet” issue. But, having a nudge on the troubleshooting tips outlined underneath, you can get rid of the issue in blink of an eye. So, why wait? Let’s get the ball rolling!
Power Cycle Your TP Link WiFi Extender
The very first fix hack that you need to try to fix “TP Link extender on but no internet” issue is to power cycle or restart your device. This hack has been tried by a number of users across the globe and found it helpful too.
You can power cycle your TP Link extender by following the instructions highlighted below:
- Unplug your TP Link WiFi extender.
- Wait for some time.
- Plug in your extender back.
- Connect the TP Link extender and router.
Check your internet connection by accessing http://tplinkrepeater.net. Are you able to make the most out of your internet connection?
Still the Same?
Reboot Your Network
If the issue remains the same, try rebooting your entire network. For this, you have to:
- Disconnect your router and the extender.
- Turn off your WiFi-enabled devices (computer, laptop, smartphone) as well.
- Wait for a few minutes.
- Turn on your router first.
- A few moments later, turn on your WiFi-enabled devices.
- Reconnect your router and the extender.
- Start using internet to the fullest.
No Luck?
If you are still getting “TP Link extender on but no internet” issue, then without much ado, try the next hack highlighted below.
Check the Connections
On the off chance if you have established an Ethernet connection between your router and the extender, then chances are it (the connection) is not stable. So, we suggest you to have a look at the Ethernet/ wired connection you have made between the devices. Ensure that it is secure and strongly made.
Apart from this, make sure that the Ethernet cable you are using is non-damaged. In the event that the cable you are using isn’t well-maintained, replace it right away.
Just in case, you don’t have additional Ethernet cable and you are a lazy bud and don’t want to go out in the market for new cable, then you are free to connect your devices wirelessly.
Reset and Reconfigure the Extender
It is possibility that your TP Link WiFi extender is partially configured and due to that you are unable to access the internet on your connected devices.
To fix it, you first need to reset your TP Link WiFi extender and then configure it again. Once you are done with resetting and reconfiguring the extender, you will have no issues while using the internet again.
Now, your internet is working fine, isn’t it? So, you don’t want to manage the internet from anywhere remotely, or control the extender’s settings, or have a look on your kids’ online activities? If you nod in yes, then without much delay, download and install the TP Link app.
Bonus Tip: Update TP Link extender’s firmware. Doing so will always help you to make the most out of your internet connection and your TP Link WiFi extender.
In a Nutshell
Here ends our article on fixing “TP Link extender on but no internet” issue. Anticipating that you are not bothered by the same issue anymore? Please share your feedback regarding the article. Was it helpful?
